Intermittent

My Trio R1000 receiver is working again! I didn't even take off the covers either. It seems the action of removing it from the shack desk has cured it for now, obviously a dry joint or loose connection then but I will have to wait for the fault to re-occur before I can Investigate.

My laptop is running Winrad nicely now with the loaned Elektor SDR receiver attached. I now have three receivers connected to the Wellbrook loop and it is interesting to compare them.
Findings so far are that the Kenwood R5000 is the best receiver, the R1000 a close second and the Elektor a good way behind these two. Weak signals that are audible on the two old receivers are not present on the SDR. It does however sound very lively on Medium Wave so I will give it a try on that band tonight.

This weekend there are many "Special Event" stations on the Air. I believe it is international lighthouse weekend and many lighthouses around Europe have been activated on the bands. I have worked a few, mainly on 80 and 40 metres but band conditions are not too good. A pity as the weather here is so bad its an ideal day to spend in the shack!

Battling with SDR

I thought I had the answer to my problems with the Elektor SDR yesterday. The Winrad software would not run under Win 7 properly and my base Unit XP machine seems just to slow to cope. As a last resort I dug out my seldom used Win XP laptop, Installed Winrad, hooked up my external soundcard and............It worked! But hold on, the audio is a bit distorted, and now the machine wants to switch off. Guess what? My laptops power supply has died! Oh well, I have ordered a replacement so hopefully I will soon have the loaned SDR receiver in operation. Watch this space!

Computer woes

In earlier entries I have mentioned the Softrock SDR receivers which I have been loaned and have been playing around with.These little receivers are single band, fixed frequency affairs. Basically you just feed their output into your computer soundcard, chose one of the many SDR software packages and away you go.
My local amateur friend who loaned me the softrock has recently purchased a Flex Radio HF transceiver. I called around to see it in his shack last week and had a quick tune around and it looks an impressive piece of kit. He is still learning how to use it and this is where I think the SDR rigs fall down at the moment. They are nowhere near "Plug and Play". Now thats fine in itself as part of the hobby is about learning and self improvement. The problem here thogh is you don't need to learn about radio its computer knowledge that counts. Knowing which operating system will or wont work with your software, installing USB drivers, dealing with incompatible soundcards, not your usual radio related problems.
I have been dealing with some of this myself this week. My friend having purchased the new rig offered me the loan of his Elektor Hf receiver. Covering up to 30 mhz this little receiver is an interesting device but:


The best way to control it is to use the "Winrad" software to which a file can be added that allows it to fully control the Elektor receiver. The problem is however that my main PC uses Windows 7. Windows 7 doesn't like Winrad- it says it is incompatible. Now Windows 7 isn't telling the full truth as I did have the little SDR working well for about 10 minutes or so before Winrad and Windows 7 disagreed and the PC locked up. Now of course Windows 7 won't even open Winrad, or if it does the software instantly locks and cannot be closed!

This isn't too bad a problem because I have an older PC here, which I use for HF data work that runs Windows XP. The only thing now is it is a slow machine 1.3Ghz CPU and 512Mb of memory, it doesn't seem to want to run Winrad. I am going to try to remove as much unnecessary software as I can from this machine and see if I can get it to work but this may take some time.

My point is this, no doubt many SDR transceivers offer superb facilities. But this morning I was able to pop into my shack- I had a few free minutes and take a quick listen on the bands. I turned on my 20 odd year old Kenwood R5000 receiver. I didn't have to wait for it to boot up, it didn't need to recognise a soundcard or any drivers- it was on- instantly and ready for use! What's more, when I was finished it switched off just as easily. As well as this it doesn't have any noisy monitors or peripherals that cause hash on the HF bands. At the moment I am not sure that there are any SDR radios that rival it!